This section explains how to update or modify the Default Gateway configuration within the load balancer.

To update the Default Gateway, follow these steps:

1. Navigate to the table list containing the network gateways.
2. Hover over the desired IP address and click on the gear icon labeled configure. This action will open a form similar to the one depicted below:

Field Descriptions:
Address. Enter the network-layer IP address of the default gateway to be used.
Interface. Select the interface that will handle outbound traffic and is not assigned to any already configured network in the load balancer.

Click the Apply button to save the changes. Once updated, the default gateway will be ready for use, ensuring efficient routing for traffic within the load balancer’s environment.