---
title: "Network | Gateway"
description: "This section guides users on how to configure a **Default Gateway** for IPv4 and IPv6 in the global routing table within the **RELIANOID load balancer**. The default gateway enables devices on a LAN to access the Internet. The table below…"
url: "https://www.relianoid.com/resources/knowledge-base/network-enterprise-edition-v8-administration-guide/network-gateway/"
updated: "2024-07-04"
category: Enterprise Edition / Administration Guide v8 / Network
---

# Network | Gateway

This section guides users on how to configure a **Default Gateway** for IPv4 and IPv6 in the global routing table within the **RELIANOID load balancer**. The default gateway enables devices on a LAN to access the Internet.

The table below displays the default Gateway used by the load balancer for both IPv4 and IPv6.

[![relianoid load balancer v8 network gateway list](https://static.relianoid.com/wp-content/uploads/2024/06/relianoid_EE8_network_gateway_list_.webp)](https://static.relianoid.com/wp-content/uploads/2024/06/relianoid_EE8_network_gateway_list_.webp)

**Address**. The IP address of the default gateway. Supports both IPv4 and IPv6.
  **Interface**. The local interface used by default for outbound traffic.
  **Actions**. Use these actions to manage the default gateway:

- **Configure**. Sets up the default gateway for the load balancer in its respective stack.
- **Unset**. Removes the configured default gateway.

These settings ensure efficient routing for both IPv4 and IPv6 traffic, enabling seamless connectivity for LAN devices to access the Internet through the load balancer.

### 📄 Download this document in PDF format