---
title: "Network | Bonding | Update"
description: "This section explains how to update and modify a **Bonding** interface. The panel is divided into **Global Settings** for configuring the interface and **Slaves** for selecting enabled slaves from available NICs. ## Global Settings In this section, configure the following…"
url: "https://www.relianoid.com/resources/knowledge-base/network-enterprise-edition-v8-administration-guide/network-bonding-update/"
updated: "2024-07-04"
category: Enterprise Edition / Administration Guide v8 / Network
---

# Network | Bonding | Update

This section explains how to update and modify a **Bonding** interface. The panel is divided into **Global Settings** for configuring the interface and **Slaves** for selecting enabled slaves from available NICs.

## Global Settings

In this section, configure the following attributes for the bonding interface:

[![relianoid load balancer v8 network bonding update settings](https://static.relianoid.com/wp-content/uploads/2024/06/relianoid_EE8_network_bonding_global_settings_.webp)](https://static.relianoid.com/wp-content/uploads/2024/06/relianoid_EE8_network_bonding_global_settings_.webp)

**Name.** The name of the bonding interface stored in the system. This is not editable.
  **Mode**. Bonding mode set during the creation of the bonding interface. This is also not editable.
  **IP Address**. Network-layer IP address of the bonding interface, supporting IPv4 and IPv6. This field is mandatory; the Netmask field must be set if DHCP is disabled.
  **Netmask/CIDR**. Subnet mask of the bonding interface, supporting Network mask format or CIDR (0 to 32 bits for IPv4, 0 to 128 bits for IPv6). This field is mandatory; the Address field must also be set if DHCP is disabled.
  **Gateway**. Default gateway used by the bonding interface.
  **MAC**. Link-layer MAC address of the bonding interface. Generate a new random MAC or configure a custom MAC address. Changing the MAC for a custom address should be done cautiously to avoid duplication.
  **Alias**. An easy-to-identify alias used when configuring a farm or any other service.
  **DHCP**. Enable or disable DHCP for the bonding interface. Enabling DHCP prevents static IP configuration and requires a reachable DHCP server.

IPv4 and IPv6 stacks are supported, ensuring that **Netmask** and **Gateway** are configured in the same stack as the IP.

## Slaves

The **Slaves** panel allows selecting **Available NICs** to add or remove as slaves in the bonding interface.

[![relianoid load balancer v8 network bonding update slaves](https://static.relianoid.com/wp-content/uploads/2024/06/relianoid_EE8_network_bonding_slaves_.webp)](https://static.relianoid.com/wp-content/uploads/2024/06/relianoid_EE8_network_bonding_slaves_.webp)

- Select the interface(s) to add or remove from the bonding interface and click the arrow to apply changes.
- Use the double arrows to add all Available NICs as slaves. Note that at least one slave must be present in the bonding.

After making all necessary changes, click the **Apply** button. The bonding interface will be updated and brought up with the new configuration.

### 📄 Download this document in PDF format
