---
title: "Network | Virtual Interface"
description: "**Virtual Interfaces** allow the assignment of more than one IP address per each **NIC**, **Bonding**, and **VLAN** interface configured in the system. See below how to configure and manage **Virtual Interfaces**. # Virtual Interfaces List The table below lists all…"
url: "https://www.relianoid.com/resources/knowledge-base/network-enterprise-edition-v6-2-administration-guide/enterprise-edition-v6-2-administration-guide-network-virtual-create/"
updated: "2023-08-03"
category: Enterprise Edition / Administration Guide v6.2 / Network
---

# Network | Virtual Interface

**Virtual Interfaces** allow the assignment of more than one IP address per each **NIC**, **Bonding**, and **VLAN** interface configured in the system. See below how to configure and manage **Virtual Interfaces**.

# Virtual Interfaces List

The table below lists all the **Virtual Interfaces** configured in the system.

[![zevenet network virtual interfaces list](https://www.relianoid.com/wp-content/uploads/2022/05/zevenet_network_virtual_interfaces_list.png)](https://www.relianoid.com/wp-content/uploads/2022/05/zevenet_network_virtual_interfaces_list.png)

This is a brief description of the fields in the table below.

NAME. Name of the virtual interface.
  ALIAS. Identifies the interface with an alias that can be easily accessed when configuring a farm or any other service.
  IP. Network-layer IP address assigned. Supports IPv4 and IPv6.
  MAC. Link-layer MAC address of the interface. It is inherited from the parent NIC interface.
  NETMASK. The subnet mask of the parent **NIC**. It can only be configured if the IP address is configured too.
  GATEWAY. Default gateway used by the virtual interface if configured. Inherited from the parent interface.
  STATUS. The status of a given virtual interface. The available values are:

- Green. If the virtual interface is **UP**.
- Red. If the virtual interface is **DOWN**.

Actions. These are the actions to use when managing the Virtual Interfaces:

- Create a Virtual Interface. This option redirects to the Virtual Interface creation form.
- Bring up. Starts the interface.
- Bring down. Shuts down the interface and stops it from accepting traffic.
- Edit. Changes the virtual interface configuration like its IP address and its alias.
- Delete. Clears the configuration and removes the virtual interface.

### 📄 Download this document in PDF format
