---
title: "Network | Routing | Tables"
description: "# Routing Tables List Once the packet reaches the rule table, a decision is made and this part of the system finally forwards the packet to a given table. This is the section where the routes of the tables can…"
url: "https://www.relianoid.com/resources/knowledge-base/network-enterprise-edition-v6-2-administration-guide/enterprise-edition-v6-2-administration-guide-network-routing-tables/"
updated: "2023-08-03"
category: Enterprise Edition / Administration Guide v6.2 / Network
---

# Network | Routing | Tables

# Routing Tables List

Once the packet reaches the rule table, a decision is made and this part of the system finally forwards the packet to a given table. This is the section where the routes of the tables can be modified.

By default, any **Relianoid Load Balancer** includes at least two tables. The table main and table_eth0. The table main is used by the load balancer for reaching external services like DNS resolution, NTP requests, proxy connection, APT updates, etc, and the table table_eth0 and the others are used for load balancing purposes where the **VIPs** are linked and their traffic is managed.

[![](https://www.relianoid.com/wp-content/uploads/2022/05/zevenet_network_routing_tables.png)](https://www.relianoid.com/wp-content/uploads/2022/05/zevenet_network_routing_tables.png)

This view shows the available routing tables in the system. The field properties are described below:
  Name: A name that easily identifies a table.
  Action: The access to the configuration view for the selected table.

### 📄 Download this document in PDF format