---
title: "Network | VPN | Create"
description: "In this section, you'll learn how to set up and configure a VPN service on the RELIANOID appliance using various VPN profiles. ## VPN services list The VPN service list is shown in the image below. ![relianoid adc load balancer…"
url: "https://www.relianoid.com/resources/knowledge-base/network-community-edition-v9-administration-guide/ce-v9-network-vpn-create/"
updated: "2026-11-20"
category: Community Edition / Administration Guide v9 / Network
---

# Network | VPN | Create

In this section, you'll learn how to set up and configure a VPN service on the RELIANOID appliance using various VPN profiles.

## VPN services list

The VPN service list is shown in the image below.

![relianoid adc load balancer v9 network vpn](https://static.relianoid.com/wp-content/uploads/2026/11/relianoid_adc_load_balancer_v9_network_vpn.webp)

## Creating a VPN Service

When you click the **Create VPN** action, a form similar to the one below will appear.

![relianoid adc load balancer v9 network vpn create](https://static.relianoid.com/wp-content/uploads/2026/11/relianoid_adc_load_balancer_v9_network_vpn_create.webp)

**Fields description:**

- **Name**: Assign a suitable label to the VPN.
- **Profile**: Select the VPN type from the available options.

Upon clicking the profile field, you can choose from three VPN profiles:

**Site-to-site: RELIANOID Site to Site VPN**. Used for client-to-load balancer or load balancer-to-server connections. Relianoid acts as the default gateway for local and remote subnets using **IPsec**.
  **Tunnel: RELIANOID Tunnel VPN**. Creates a GRE tunnel over IPsec, suitable for client-to-load balancer or load balancer-to-server connections. Relianoid serves as the default gateway for local and remote subnets.
  **Remote Access: RELIANOID Remote Site VPN**. RELIANOID functions as a VPN server, assigning dynamic IP addresses to clients, with traffic routed through the load balancer using **IPsec** in server mode (road warrior).

Refer to the figure below for the VPN profile selection.

![relianoid adc load balancer v9 network vpn create profiles](https://static.relianoid.com/wp-content/uploads/2026/11/relianoid_adc_load_balancer_v9_network_vpn_create_profiles.webp)

When you select a profile, such as **Tunnel (Tunnel L2TP)**, a more detailed form will appear. Fill out this form carefully with the required information.

The image below shows a glimpse of the fields in the detailed form.

![relianoid adc load balancer v9 network vpn create profiles tunnel](https://static.relianoid.com/wp-content/uploads/2026/11/relianoid_adc_load_balancer_v9_network_vpn_create_profiles_tunnel.webp)

Here is a brief description of the fields you'll fill in the form:

### Authentication

**Authentication method**. Method to verify submitted credentials. This method is usually kept a secret.
  **Password**. User password for accessing the VPN.

### Local Network Configuration

**Local gateway**. Default gateway for the local server to access external resources.
  **Local IP**. IP address of the local server (supports IPv4 and IPv6).
  **Local netmask**. Subnet mask of the local server.
  **Local tunnel IP**. IP address of the local tunneling host (supports IPv4 and IPv6).
  **Local tunnel netmask**. Subnet mask of the local tunneling host.

### Remote Network Configuration

**Remote gateway**. Default gateway for the remote server to access external resources.
  **Remote IP**. IP address of the remote server (supports IPv4 and IPv6).
  **Remote netmask**. Subnet mask of the remote server.
  **Remote tunnel IP**. IP address of the remote tunneling host.

### Phase 1 Configuration

**Authentication**. IKE Phase 1 negotiation algorithm.
  **Encryption**. Encryption algorithms for securing data packets.
  **DH group**. Algorithm for data secrecy between VPN endpoints.

### Phase 2 Configuration

**Protocols**. Type of IPsec protocol for authenticating packets.
  **Authentication**. IKE Phase 2 negotiation algorithm.
  **Encryption**. Encryption methods for securing data packets.
  **DH group**. Algorithm for data secrecy between VPN endpoints.
  **Pseudo random function**. Algorithm for creating randomness in keying purposes.

Both **IPv4** and **IPv6** stacks are supported, with the requirement that the **Netmask** and **Gateway** are configured in the same stack as the IP address.

Once all required fields are filled, click the **Apply** button to create the new VPN service.

### 📄 Download this document in PDF format
